search
    Modular Self-cleaning Filter System (MSC)

The MSC series modular self-cleaning filter is a fully automatic filter system introduced by SP based on the idea of modular design. Featuring high reliability, flexible expansion, automatic operation, high durability, no need for manual cleaning, easy opening and maintenance, the filter system has unique V-SLOT cartridge that enable complete back-flushing and consume a small amount of back-flushing solution. Besides, the MSC filter system can also be used to purify fluids, so as to protect subsequent devices. With internationally first-class quality, the filter is manufactured following the high performance, high quality and high reliability requirements of SP.


Advantages

Modular Self-cleaning Filter System (MSC)


Stainless steel pipes with longer service life are used in lieu of primary plastic pipes.

Cylinders and valves of domestic and foreign reputed brands are used; imported solenoid valves are used for control.

For the liquid inlet and outlet of the system, straight pipes with both ends open are used, with a section of blind plate as seal; it is well adaptable to installation sites, with flexible configuration of pipes.

V-SLOT high-performance and precise filter cartridge are used to realize good filtration of impurities and maintain long-term stable flow.




Applications

Water treatment systems, refrigerating systems, electric power, steel and iron, paper-making, mining, petrochemical engineering, municipal facilities and etc.  


Data Sheet

Filter   ModelMSCR filter   systemMSCV filter   system
Back-flushing   LiquidFiltrateExternal clear liquid   or others
Applicable   Viscosity<50cps<100cps
Content of   Impurities<300ppm
Minimum   Pressure Required at the Inlet>0.3MPaNo special   requirement, also applicable to <0.3MPa
Installation   PositionAfter pumpBefore or after pump
Filter   Precision50-500um20-500um
Standard   Design Pressure Grade1.6MPa, 2.5MPa, 4.0MPa
Maximum Design   Temperature0-250℃
Number of   Filter Cartridge3-24
Dimension of   Valves at Inlet and Outlet of Filter Element (Note 1)DN50(2”), maximum flow rate   25m3/h, DN65(2 1/2”), maximum flow rate 42m3/h
Dimension of   Valves at Inlet and Outlet of Filter ElementDN50(2”), DN65(2 1/2”)
Filtering Area   of Filter ElementC-type, 2670cm2, K-type,   3140cm2
Differential   Pressure for Back-flushing70KPa-130KPa
Warning   Differential Pressure200KPa
Dimension of   Inlet and Outlet of Main PipeDN80-DN400
Type of Flange   at Inlet and Outlet of Main PipeLoose flange, flange plate   made of galvanized carbon steel
Type and   Material of Filter ElementV-SLOT metal element made   of 304/316L
Material of   Housing in Contact with Fluid304/316L
Material of   Housing SealNBR  (standard)/VITION
Fluid Control   ValvePneumatic ball valve,   protection grade IP65, valve seat made of PTFE
Public Supply   Requirements220V AC, 0.4-0.6MPa clean   and dry compressed air
Control SystemSiemens PLC, working   voltage 24V,IP55
Differential   pressure indicatorDifferential pressure   switch (standard) or differential pressure transmitter


Photos

Modular Self-cleaning Filter System (MSC)     Modular Self-cleaning Filter System (MSC)    Modular Self-cleaning Filter System (MSC)

V-SLOT high-performance precise filter element 


PurethyAI
SP IA