The completion fluid is used in the drilling area before drilling, and the oil well repair fluid is used to repair the oil well in production. All these fluids must be clean to avoid blocking the oil layer. Completion fluids and workover fluids are used to clean oil wells, remove drill cuttings, mud filter cakes, cement, and control sand carried during oil production. The function of the filter is to intercept the impurities in the liquid and return the clean liquid to the oil well.

SP Solution:

All fluids in contact with the oil-producing layer need to be filtered and cleaned, including drilling fluids, drilling fluids, completion fluids, workover fluids, reaming fluids, and so on. The entry of fine impurities into the oil-producing layer will reduce the permeability of the well bore, thereby reducing the productivity of the oil well. In order to avoid the destruction of the oil-producing layer, the completion fluid and workover fluid must be filtered. The ideal completion fluid is best free of any solid impurities. In fact, the goal is to set the most economical to remove particles of 5 microns or smaller. Stable and reliable oil well fluid filtration can ensure high oil yield and prolong the working life of the oil well. In order to extend the life of the high-efficiency filter element, it is necessary to A pre-filter is installed before the precision filter to remove large impurities.

SP Advantages:

ØWide range of uses, can be used in different filter grades such as coarse filtration, intermediate filtration or fine filtration.

ØLarge processing capacity, low cost and high efficiency.

ØThe system design has a high degree of automation, saving manpower and material resources.

ØThe cleaning is efficient and thorough, and the filter screen can be completely restored to its original state without replacement.